| Date |
Type |
Description |
| 24.10.02 |
|
Export
geometry - save dialog with current cad name |
| 20.10.02 |
|
Deactivated
SpaceBar point when displaying feature property dialogs |
| 18.10.02
|
CNC |
Edge
Point cnc program
Similar to SP program for edge point Ept_tp__.seq |
| 24.09.02 |
|
Enable
print one fetaure option in Result Window |
| 29.08.02 |
Surface |
Changing
surface property of SP
after change of surface there is a question box whether to
update Execute comand parameters of this SP, if exists. |
| 21.08.02 |
Surface |
Surface
selection for SP property
Now order of the surfaces list is is modified by correction
dir. If the corr dir is more away from prpendicular to the
surface its distance on the list is increased and the surface
is shifted down on the list. Surfaces on non-visible layer
are not taken into account |
| 14.08.02 |
Surface |
Surface
selection in SP surface dialog in 3D
Selecting surface in te list in surface property of SP feature
higlights the surface in the 3d view. |
| 08.08.02 |
|
Save
MW background color to ini and part file |
| 05.08.02 |
|
HTML
template |
| 01.08.02 |
Surface |
SURF_TP
program modified
The second move has been removed. Now program goes to the
point margin away from the surface coordinates, and then is
a touch moveby with the margin length. Underrun and overrun
values are not used directly by the subprogram. |
| 30.07.02 |
|
Report
HTML report can be edited with Front Page.
Measure Window bitmap is now exported also from MW mode as
well as 3D. |
| |
|
Autosave
mod
Now save and autosave dosn't finish learn mode and measured
feature. But still the part after load will always have learn
mode disabled and no feature will be active. |
| 16.07.02 |
|
Autosave
mod
This saves now only PAR file, without axd geometry file, this
should minimize interrupts when working with the program. |
| |
|
Feature
default name setup in program options |
| |
|
New
result box type "Minimum"
This is always one line box, with fetaure name and a result
number. The result displayed is the first from the list in
reults window - it can only be changed by enabling/disabling
results in the tolerance table. |
| 10.07.02 |
|
Results
"Use Dimensions" flag
The flag is now remembered in te part file, separately for
each view. |
| |
CNC |
CNC
program time
The cnc program last execution time is displayed in the status
line after loading part has been opened from file |
