| Date |
Type |
Description |
| 29.01.04 |
|
Printout
set/clear additional buttons for all features in printout
confuration dialog. |
| 14.01.04 |
Pipe |
Inches
envelope errors outside tolerance not highighted
- Tolerance Band [PASS] / [FAIL] text added.
- Supplementary pipe data updated after units change.
- Result preview window updated after units change. |
| |
|
HTML
export - part name field |
| 06.01.04 |
|
Result
boxes options (All,In tolerance,Out of tolerance) working
in 3D view |
| 22.12.03 |
CNC |
-
program after error always stay in pause, then it can be
run or stopped
- cnc error causes to switch to joystick mode, run or step
reenables cnc mode
- permament error like emergency stop and limits display
message box until
the error dissapears |
| |
Pipe |
Pipe
nominal table import.
Pipe data dialog - Load button imports text file which contains
nominal data.
Program reads only lines which contain 3 numbers (separated
by comas or space)
The numbers should be x y z or y b c, depends on the current
selection in dialog.
exmpl.
0.000, 0.000, 0.000
10.000, 0.000, 0.000
29.696, 3.473, 0.000
No other data is read at the moment. Nomber of strights
is determined by number
of correctly read lines.
Other data like tube diameter and bend radius for a moment
have to be set
manually until file format for those will be defined. |
| 10.12.03
|
|
Result
options dialog - "Save as default" checkbox option
added for Results options are saved for each view separately
with the part file Default values are used for all views
of the New part. |
| |
|
Coordinate
systems ignored for zoom all in both MW and 3D views. |
| |
|
Axel
header in raport text box - date and time placed in the
sepearate line
the same changed in save results to file. |
| 27.11.03 |
|
Additional
text info and logo in axe splash bitmap, data in axel.ini
Example for itp.
[AxelSplash]
User=ITP
EnableUserData=1
Text1=ITP
Text2=www.itpgroup.co.uk
Text3=itp@itpgroup.co.uk
;picure 122x80 pix, no stretch done
Bitmap=itplog3d_small.bmp) |
| |
|
AxReport
notifies Axel about report file and its disk path. Its location
is
now remembered with part file (previous default search path
was 'parts' dir).
Axel gets the report name in the moment of load/save/close
the raport.s |
| 22.11.03 |
|
New
22-characters code to avoid characters mistyping. (Previous
version of axel still accept 20-char code) |
| 17.11.03 |
|
3-axis
joystick support. Accesible though F2 toggle (a small icon
appears in the probe status). In Setup menu there is Joystick
setup |
| 12.11.03 |
|
Modifiations
inside calibration program :
- measure points slightly above the equator (80 deg of the
sphere)
- message about probe psitioning is diaplyed only for the
first position
- corrected moves to avoid the stem
- increased margin, but later there will be access to this
parameter from the dialogCalibration
sphere uses its nominal diameter for drawing in MW and 3d
instead
of measured like other features do. Selection
colour is disabled in 3d for the calibration sphere. |
| 23.10.03 |
|
Message
property dialog of the feature.
Del
key now can be used in the editor.
The dialog box is closed before feature is deleted. |
| 14.10.03 |
Surface |
Enabled
draw of safety planes in 2d views. This is for MW view only
(change of 3rd mouse coordinate - Ctr+Shift+LBmouse move) |
| 24.09.03 |
|
PChanges
in 3d save bitmap/export regarding bitmap size.
Now definition of the size is in mm/inch plus selection
of dpi. |
| |
CNC |
With
learn option "Use standard program" switched off,
now there is possibility
of selecting existing feature from the list (measured erlier),
press
remeasure function (instead of new fetaure). Learn will
insert Measure-Finish
comands. |
| |
|
3d
Points mode points can now be selected when geometry is
referenced
to any system |
| |
|
3D
model position updated after changing geometry reference
system |
| 12.09.03 |
|
Bitmap
added to standard printout, setup in printout page of
options dialog. It is a global setup for all parts |
| 09.09.03 |
|
Fonts
of standard printout header lines changed |
| 26.08.03 |
|
Geometry
transform dialog, removed change of checkboxes after coord
system change view |
| |
|
Increased
size of expression string in cnc command |
| |
|
Increased
size of expression string in UserRes feature (to 255 characters) |
