| Date |
Type |
Description |
| 22.11.04 |
|
New
cnc program for plane measurement PLA_TPc1.SEQ (circular).
The program can be selected in options - standard programs
and plane program property dialog. |
| 12.10.04 |
|
When
in joystick off-line mode, program does not send commands
to PH9/10 probe. It allows off-line programming. |
| |
|
Joystick
control panel (in menu Windows) added. It works in
addition to windows joystick and is used for moving the
axes of virtual CMM machine in off-line programming. |
| |
|
Program
property dialog extended. Now you can change the standard
feature sequence and dry run it. |
| 07.11.04 |
3D
View |
Drawing
circle and arc fetaures in 3d corrected/improved
for beter visibility. |
| |
|
Changed
joystick movements. Joystick directions are always
relative to the Measure Window observer. |
| 22.10.04 |
|
Joystick
button and space bar enabled for enering move in
Learn mode, while
3d points mode is acive. |
| |
CAD |
Warning
message if Iges contains hidden entities |
| |
CAD |
Catia
import dialog progress bars added |
| |
Surface |
Surface
property for the plane is added if selectedf in program
options
(Surfaces page), and if the plane is initially measured on the cad.
Plane results are corrected by the thicknes in the same way as probe correction.
This is applied when the plane is measured with non- cad points. |
| 12.10.04 |
|
Probe
tips selection menu shows calibratio state, similar
as in the list
in the calibration dialog. |
| 11.10.04 |
CAD |
IGES
- some invisible entities from iges now can be found
on geometry
hidden layer after iges load. |
| 30.09.04 |
|
End
of feature sounds
OOT sound is on when :
- tolerances/nominals defined in toler dialog
- fetuare defined from cad
- pipe features
- GO : fetaures that has measure points from machine - ie not construction
- no sound for SP, EP at the moment |
| 08.09.04 |
Colision
Detection |
New
Dry run in 3d simulation, with colision detection
ane unexpected data
point error. Parameters in menu Program-Options. |
| 08.09.04 |
|
New
Cylinder constructions
Cylinder feature can be constructed from one circle or circle + point(for
length).
Cylinder can now have user diameter (at the moment used in pipe with flange) |
| 24.08.04 |
|
Surface
points import from text file
A text file with lines
X Y Z i j k
can be imported and surface points for each such line will be created.
SP will have current working reference system, and the file coordinates
are assumed to be in this system. |
| 19.08.04 |
|
Separate
MoveTo button in the program editor - creates MoveTo
command
with current probe position in working system. |
| 17.08.04 |
3DView |
3D
axes in the left corner shows status working system if
the option
is checked in 3d menu-grid-coordinates-current working system.
If this selected do Desktop Save to remember this setup (at the memoment
this choice in not saved in the part files). |
| |
Pipe |
BestFit
alignemnt enabled for pipe module. |
| 30.07.04 |
CAD |
3D
probe cross.
A cross of size 15 mm is displayed when the probe model is hidden.
The cross is also displayed in collisions mode (bigger size 30 mm). |
| 28.07.04 |
|
Solid
with mesh option in 3d menu for geometry |
| |
CNC |
With
learn option "Use standard program" switched
off, now there is possibility
of selecting existing feature from the list (measured erlier), press
remeasure function (instead of new fetaure). Learn will insert Measure-Finish
comands. |
| |
|
3d
Points mode points can now be selected when geometry
is referenced
to any system |
| |
|
3D
model position updated after changing geometry reference
system |
| 09.06.04 |
|
Results
boxes 3d view for SP
There is a result boxes option to hide boxes of SP that are hidden in 3d view.
This option might need some testing as it sometimes hides boxes that should
be visible. |
| 05.06.04 |
|
Result
boxes arrow line is now in selected colour (if feature
selected) |
| |
|
GO
mode results window now shows previous feature from the
current one,
until first data point is collected, similar to the 'repeat' mode. |
| 19.04.04 |
|
MMC
position tolerance
MMC is enabled for Position tolerance feature with second feature
as circle.
It takes Nominal, LoTol, UpTol of the circle diameter.
Positional tolerance is eneterd in the UpTol of the Position
feature, but results tables display calculated MMC tolerance im this
position. |
| |
|
Runout
tolerance feature
It takes two features data :
1 - line, cylinder, cone
2a - plane,
2b - cylindr, cone
2a - face runout calculated as:
squareness line-plane over the reference length +
plane flatness (???)
2b - axial runout calulated as :
distance between the two axes in space (???) +
paralelism of the two axes over the reference length +
both cylindricity(conicity) |
